HVAC & Plumbing Services in Perrysburg, OH

Responded to no-heat call on 12-year-old Hopkins furnace (Model PDP150AE0180SCAAN). Customer reported setting temperature up but receiving only cold air despite recent maintenance visit. Upon arrival, diagnosed faulty thermostat as cause of system malfunction. Per customer request, replaced existing thermostat with new Emerson digital unit from truck inventory. Verified proper wiring connections and system communication. Tested furnace operation through complete heating cycle, confirming unit now responds correctly to thermostat calls and delivers heated air at proper temperature. System operational and left in heating mode with customer satisfied.

# Annual Furnace Maintenance Completed Performed comprehensive preventive maintenance on 1-year-old Lennox furnace system. Verified proper equipment leveling and installation integrity using precision level tool. Conducted electrical diagnostics and measurements using Fluke 116 True RMS multimeter, recording system parameters to ensure proper operation. Inspected condensate drainage system including PVC piping connections and verified all joints were secure. Checked aluminum coil condition and confirmed proper system operation. All components found to be functioning within manufacturer specifications with no immediate service needs identified.

Responded to water leak concern near HVAC system. Upon arrival, inspected area where standing water was reported around equipment. Discovered heavily soiled air filter with significant debris accumulation that was restricting airflow and causing condensate drainage issues. Identified water heater in proximity to HVAC system with copper piping and shutoff valve. Documented conditions with photographs showing filter condition and equipment setup. Removed and displayed contaminated filter to show extent of blockage. Recommended filter replacement and verified condensate drain line functionality to prevent future water accumulation issues.

Completed routine maintenance on a 20+ year old air conditioning system. Performed comprehensive inspection using borescope camera to examine internal ductwork and components, verifying system integrity and identifying no immediate concerns. All mechanical components assessed and system confirmed operational for continued cooling service.

Completed comprehensive heating and cooling maintenance on 7-year-old HVAC system. Performed full tune-up inspection of furnace air handler unit and air conditioning system, checking all operational components, electrical connections, refrigerant lines, condensate drainage, and safety controls to ensure optimal performance for the upcoming season.

Responded to service call for Lennox furnace running excessively with inadequate heating and noise issues that began following recent AC service two days prior. Upon arrival, performed complete system diagnostic including visual inspection of indoor air handler unit, ductwork connections, and outdoor condensing unit. Verified PVC condensate drain lines and venting system were properly installed and functioning. Checked all electrical connections, conduit routing, and safety controls. Inspected blower motor operation, heat exchanger, and air flow through system. Documented equipment condition with photographs showing proper installation of vertical PVC piping from furnace, secure duct connections to metal plenum, and outdoor unit positioning on concrete pad. System producing some heat but not achieving adequate temperature rise across heat exchanger. No error codes present at time of inspection.

Completed full boiler replacement including removal of existing unit and installation of new boiler system. Mounted new boiler on level surface and connected all supply and return piping with required pressure relief valve, water level gauge, and safety devices. Installed gas line connection to main supply with gas shutoff valve, verified all connections for leak-free operation. Completed electrical wiring per manufacturer specifications and local code requirements, including control panel integration and thermostat connections. Filled system, performed startup procedures, and verified proper operation. Unit includes 5-year parts warranty, 1-year labor warranty, and 20-year heat exchanger warranty.

Completed comprehensive heating maintenance inspection on HVAC system. Performed thorough visual examination of internal furnace components including heat exchanger, blower assembly, burner section, and electrical connections. Utilized inspection camera to document condition of heat exchanger and verify proper operation of all mechanical components. All wiring connections were inspected and found secure with proper wire management in place. System operational and functioning within normal parameters upon completion of maintenance service.

Responded to service call for gas leak on 12-year-old furnace. Conducted comprehensive combustion analysis using Testo 310 II analyzer, which revealed elevated CO levels (98-127 ppm) and stack temperatures between 111-114°F. System operating at 92.6-92.9% efficiency with excess air levels of 27.9-31.0%.

Conducted comprehensive assessment of existing Trane furnace system and provided detailed replacement estimate. Evaluated current installation including ventilation configuration with dual PVC exhaust pipes, condensate drainage system, and surrounding utility space conditions. Documented unit specifications and connections via photographic evidence to ensure accurate replacement proposal.

Performed routine service call on 10+ year old boiler system. Confirmed proper operation of the hydronic heating components and inspected pressure gauge which showed signs of condensation. Visual inspection of venting, water heater, and associated piping revealed normal wear consistent with system age.

Performed annual heating maintenance on three propane furnaces in greenhouse facility, including the Lennox suspended unit heater. Inspected fan assemblies, heat exchangers, electrical connections, and verified proper operation of all three systems which are under 10 years old. All units are functioning within normal parameters with no significant issues observed.

Conducted mini split assessment for replacement of outdated metal heating unit with floor-mounted installation and existing exhaust ventilation. Inspected current PVC ventilation system, noting wear on elbow joints and connection points that would require modification for new system compatibility. Recommended complete replacement of heating system with modern mini split solution to improve efficiency and eliminate ventilation issues.

Performed comprehensive heating maintenance service on a Lennox furnace system. Inspected all components including PVC intake/exhaust venting, ductwork connections, and auxiliary equipment. System is functioning properly with no issues identified at this time.

Inspected boiler system and identified significant condensation and frost accumulation on pipe assembly at elbow connection. Observed water droplets forming on metal pipe surface, indicating potential temperature differential issues between system operation and ambient conditions. System components, including yellow corrugated flexible hose and primary piping, were documented for further analysis.

Performed scheduled maintenance on hot water tank boiler system. Inspected control board, high limit control, and temperature setpoint (currently at 140°-150°). Cleaned components and connections to ensure optimal functionality of heating system.

Performed annual furnace maintenance on 4-year-old system. Inspected circuit board, electrical connections, and blower motor assembly. Replaced dirty air filter (16.25x1) with new one. Noted that Maintenance Value Plan (MVP) has expired; service was completion of previously scheduled maintenance obligation.

Performed routine furnace maintenance service and inspected customer's water heater which showed significant mineral deposits and corrosion on copper pipes and fittings. Documented buildup around pipe connections and pressure release valve, noting the aged condition of plumbing components. Customer was provided with recommendations for addressing the deteriorating vent in bedroom as requested.

Completed routine heating maintenance visit on natural gas furnace. System was inspected and found to be in normal operating condition with proper ductwork connections. No issues were identified requiring immediate attention; service event was completed as scheduled.

Performed scheduled heating maintenance service with focus on inspection of electric motor components and housing unit. Checked motor specifications, wiring connections and mounting integrity within the ventilation system. Examined wall-mounted heating unit with louvered panels for proper airflow and verified operational status.