HVAC and Water Heater Services in Maumee, OH

Performed comprehensive cooling maintenance on 14-year-old residential air conditioning system. Inspected outdoor condenser unit, verified proper electrical connections at disconnect box, checked refrigerant levels, cleaned condenser coils, and confirmed operational status of fan motor and compressor. Unit operating within normal parameters with no immediate repairs required.

Conducted comprehensive assessment of existing HVAC system for complete replacement estimate. Evaluated indoor air handler unit located in basement utility area, noting aged copper refrigerant lines with oxidation, filter drier component, and PVC condensate drainage system. Inspected outdoor condensing unit positioned on concrete pad with electrical disconnect, documenting current equipment specifications and installation configuration. Photographed both components to provide detailed documentation of existing system condition for replacement proposal.

Completed comprehensive annual maintenance tune-up on one-year-old outdoor air conditioning unit as part of MVP preventative maintenance program. Performed standard inspection procedures including internal ductwork examination using digital borescope camera to assess system cleanliness and identify any potential airflow restrictions or contamination within the ventilation components.

Performed comprehensive tune-up on 20+ year old outdoor air conditioning system. Unit inspection revealed aging equipment with heavily corroded electrical disconnect box showing significant rust and weathering, though system remains operational. Completed standard maintenance procedures including cleaning condenser coils, checking refrigerant levels, testing electrical connections, inspecting fan motor and blade assembly, and verifying proper system operation.

Completed warranty replacement installation of Bradford White residential water heater in utility room. Removed existing failed unit and installed new Bradford White water heater with proper venting and gas connections. Connected copper supply lines with brass shut-off valves, ensuring secure hot and cold water distribution. Installed gas control valve assembly and verified all connections for leaks. Tested unit operation and confirmed proper heating function before completion.

Completed routine cooling maintenance visit on outdoor AC unit of unknown age. Performed standard inspection and service procedures, documenting equipment condition and exterior utility connections. Unit accessible despite overgrown vegetation surrounding electrical disconnect and refrigerant lines near building exterior.

Completed installation of a 40-gallon Bradford White residential water heater in utility area. Connected copper supply and discharge lines with proper shutoff valves, installed exhaust venting system extending to ceiling, and verified all plumbing connections for proper alignment and secure fittings using precision leveling equipment.

Completed installation of 2.5 ton single-stage AC package unit with slim duct air handler. Relocated condenser unit from concrete to new pad in flower bed, maintaining required 3-foot clearance from electrical meter per code. Installed new 3/4-inch line set spanning 205 feet connecting outdoor condenser to indoor air handler. Ran new electrical whip and installed disconnect box at exterior unit location. Mounted programmable thermostat for system control. All refrigerant lines properly insulated and secured, condensate drainage installed with appropriate traps, and electrical connections completed to code specifications. System tested and operational upon completion.

Completed equipment estimate for HVAC system replacement including indoor Amana furnace unit installed in basement utility area and outdoor air conditioning condenser unit positioned on concrete pad against exterior wall. Installation includes proper PVC drainage and ventilation piping, insulated refrigerant lines, metal ductwork integration, electrical disconnect box, and all necessary connections for complete heating and cooling system operation.

Responded to callback for A/C short cycling issue following previous service visit. Upon arrival, performed system diagnostics revealing temperature split of 20 degrees (72°F return to 52°F supply). Observed severely dirty 20x25x5 air filter requiring replacement. Verified condensate pump operation with 10-second run cycle functioning properly. Measured condenser amperage at 0.45/5.63 amps with 4.88 amp startup, within normal parameters. Identified low refrigerant pressure indicating potential system leak. Conducted comprehensive refrigerant leak search using electronic leak detector, ultrasonic equipment, and soap bubble testing methods. Inspected both indoor evaporator coil assembly and outdoor condenser unit thoroughly. No active leaks detected during inspection. Noted possible leak source from schrader core that was tightened during previous visit, or potential leak on inaccessible back side of evaporator coil. Recorded ambient conditions: outdoor dry bulb temperature 70°F, wet b

Completed scheduled AC maintenance visit including inspection of outdoor disconnect box with DiversiTech enclosure and Edison fuses, and indoor furnace unit with associated condensate drain lines and refrigerant piping. All electrical components, safety disconnects, and system connections were inspected and found to be in proper working order for continued cooling season operation.

Completed maintenance visit on 9-year-old air conditioning system. Performed inspection of outdoor unit, accessing electrical compartment to verify proper operation of ConServe control module and associated wiring connections. Examined capacitor labeled CAP05045044OCT dated 2018, confirming component integrity and proper electrical connections. All components functioning within normal parameters at time of inspection.

Performed preventative maintenance and cooling system evaluation on a 2-year-old residential air conditioning unit. Inspected Lennox HVAC system, verified proper operation of all cooling components, and confirmed system availability and functionality. Unit found to be operating within normal parameters with no immediate service concerns identified.

Completed comprehensive air conditioning tune-up on 5-7 year old residential cooling system. Performed full preventive maintenance including inspection of outdoor condenser unit, indoor air handler, refrigerant levels, electrical connections, and airflow components. All equipment found operating within manufacturer specifications with no deficiencies noted at time of service.

Responded to building inspector's citation regarding improperly secured AC disconnect on newly installed system. Reinforced and properly mounted the electrical disconnect box to the exterior wall per code requirements, ensuring secure attachment to structure and proper conduit support. Verified all electrical connections remained intact and system operational upon completion of corrective work.

Completed annual cooling maintenance on residential Trane HVAC system per home plan agreement. Performed comprehensive inspection of outdoor condensing unit, verifying proper operation of compressor, condenser fan motor, and electrical components including capacitor and contactor. All electrical connections were secure with no signs of overheating or deterioration. Checked refrigerant pressures and confirmed system is operating within manufacturer specifications. Inspected indoor air handler and furnace unit, verified proper airflow and filter condition. Documented system condition with photos showing clean electrical compartment and properly functioning components. Unit is one year old and operating efficiently with no issues identified requiring immediate attention.

Completed maintenance visit plan on 10-year-old air conditioning system serving a 9-to-1 window configuration. Inspected Lennox air handler unit in basement mechanical room, verified proper operation of condensate drainage system with white PVC piping. Tested and evaluated electrical components including capacitor, confirmed proper readings on diagnostic gauges. All equipment operating within normal parameters at time of service.

Completed routine air conditioning maintenance on residential cooling system. Performed electrical diagnostics using clamp meter to verify amperage draw and system performance on outdoor condenser unit. Inspected condensate drain line operation and confirmed proper drainage. All components tested within normal operating parameters and system running efficiently.

# HVAC Maintenance - Cooling Service Performed comprehensive annual maintenance on a 13-year-old residential air conditioning system. Upon arrival, conducted visual inspection of outdoor condenser unit, noting accumulated dirt and debris on spiral-finned condenser coil and signs of age-related wear on components. **Outdoor Unit Service:** - Inspected condenser unit positioned on concrete pad adjacent to residence - Evaluated condition of spiral-ribbed condenser coil, identifying significant dirt accumulation in fin grooves - Cleaned condenser coil thoroughly to restore optimal heat transfer efficiency - Checked refrigerant lines and electrical connections for integrity - Verified proper operation of condenser fan motor - Inspected electrical disconnect and service panel mounted on exterior wall - Evaluated mounting platform and concrete pad condition - Confirmed adequate clearance around unit for proper airflow **Indoor Unit Service:** - Accessed evaporator coil assembly and serpent

Completed full HVAC system installation featuring Lennox Merit Series downflow 80% efficiency furnace with matching downflow cased coil. Installed new refrigerant lineset with proper insulation, mounted outdoor condensing unit on new equipment pad, and connected electrical service including new disconnect and whip. Set and wired Honeywell thermostat for system control. Fabricated and installed metal ductwork transitions, connected 8-inch round supply duct in crawlspace to distribution system. Ensured proper equipment leveling, secured all refrigerant line connections, sealed ductwork joints, and verified electrical connections meet code requirements. System tested and operational upon completion.