HVAC & Plumbing Services in Sylvania, OH

Completed comprehensive heating system tune-up and maintenance on residential forced-air furnace unit. Performed thorough inspection of all internal components including blower motor, electrical connections, and mechanical assemblies with access panel removed for detailed evaluation. Verified proper operation of all system components, checked condensate drainage piping, and documented equipment condition through photographic records for service history.

Completed recurring cooling service maintenance visit on residential HVAC system. Performed thorough inspection of evaporator coil assembly within air handler unit, verified proper installation and mounting within cabinet, and documented system condition through photographic record. All components including refrigerant lines, drainage piping, and electrical connections found to be properly secured and functioning as designed.

Responded to no heat call where customer reported burning plastic smell from furnace the previous night. Upon inspection, discovered severely corroded heat exchanger with visible deterioration and surface oxidation. Used borescope camera to document internal damage to heat exchanger cells, confirming multiple areas of concern that posed potential safety hazard. Removed and photographed damaged heat exchanger section showing significant corrosion on copper-colored metal surfaces. Recommended furnace replacement due to failed heat exchanger and age of unit. System tagged out of service for safety until replacement can be completed.

Completed full HVAC system installation including a 17 SEER 3-ton 2-stage condensing unit with new electrical disconnect and whip, paired with a 99% AFUE 90,000 BTU variable speed upflow gas furnace equipped with concentric venting for fresh air intake. Installed upflow cased evaporator coil with metal supply plenum, 5-inch filter rack, 17-gallon whole-home humidifier, and condensate pump with clear tubing for proper drainage. Ran new 3/4-inch x 30-foot refrigerant line set connecting outdoor and indoor units, placed condensing unit on new equipment pad for proper elevation and stability. Installed S-40 programmable thermostat for precise 2-stage system control. Relocated existing expansion tank for water heater to accommodate new equipment layout and ensure proper clearances. Verified unit was leveled using torpedo level to ensure proper operation and drainage. All equipment installed per local building codes and manufacturer specifications. Tested system operation including heating c

Conducted on-site assessment for water heater replacement in 23-year-old residential property. Evaluated existing water heater installation in basement utility area, documented current configuration including copper supply piping connections and PVC venting system, and provided comprehensive replacement estimate to homeowner.

Completed comprehensive heating system tune-up and maintenance service. Inspected HVAC system components, including air handler unit and filtration system. Identified significant dust accumulation on return air grille mesh screen, indicating reduced airflow efficiency. Removed and replaced dirty pleated air filters with new units to restore proper system airflow and improve indoor air quality. Verified all mechanical components operating within normal parameters upon completion of maintenance procedures.

Completed scheduled maintenance tune-up on 12-year-old residential air conditioning system. Inspected control board, electrical connections, and refrigerant lines within the unit; all components found to be operating within normal parameters. Documented equipment condition with photographs of control panel and exterior condensing unit installation for service records.

Completed full HVAC system installation including a 17 SEER 3-ton 2-stage condensing unit paired with a 90,000 BTU 99% AFUE variable speed upflow gas furnace. Installed upflow cased evaporator coil with metal supply plenum, new 3/4" x 30' refrigerant line set, and equipment pad for outdoor unit. Added 17-gallon whole-home humidifier, 5-inch filter rack, and condensate pump with clear tubing for proper drainage. Ran concentric vent piping with fresh air intake per manufacturer specifications. Installed new electrical disconnect and whip for outdoor unit, upgraded to S-40 programmable thermostat, and relocated existing water heater expansion tank to accommodate new equipment layout. Verified all components installed per local code requirements, leveled equipment, tested system operation including heating and cooling cycles, confirmed airflow and refrigerant charge within manufacturer specifications, and ensured proper condensate drainage and humidifier function.

Performed comprehensive clean and check maintenance on 9-year-old residential heating and cooling system, including furnace and air conditioning components located in attic installation. Serviced Amana condensing unit on exterior pad, inspected air handler with ductwork connections, and installed media filter (#210/#410). All equipment operating within normal parameters upon completion of tune-up procedures.

Completed preventive maintenance on 14-year-old air conditioning system during scheduled service window. Inspected outdoor condenser unit, noting accumulated debris and leaf buildup around base; cleaned exterior surfaces and removed obstructions to ensure proper airflow. Evaluated and serviced indoor air handler, including filter inspection which showed moderate dust accumulation on pleated media but remained serviceable. All system components operating within normal parameters upon completion.

Completed comprehensive gas furnace tune-up including system diagnostics and electrical testing. Measured supply voltage at 355V using calibrated multimeter to verify proper electrical service to unit. Reviewed filter maintenance requirements with customer, noting current 16x25 filter size and recommended monthly replacement schedule for optimal system performance.

Completed comprehensive evaluation of existing HVAC system for replacement estimate. Assessed outdoor condensing unit positioned on concrete pad against building exterior and documented current condition. Inspected indoor air handler and associated condensate drainage system within mechanical closet, noting existing PVC piping configuration and water heater proximity. Provided detailed photographic documentation of both exterior and interior components to support replacement system specifications and installation planning.

Completed comprehensive evaluation of existing residential HVAC system for full replacement estimate. Documented current equipment including basement-installed furnace unit with evaporator coil and outdoor cylindrical condenser unit. Assessed ductwork configuration, air filtration components, and condensate drainage system. Photographed all major equipment and installation conditions to provide accurate replacement specifications and system sizing recommendations.

Responded to installation inspection violation regarding improper venting material. Upon arrival, located HVAC exhaust termination on exterior wall with cellcore piping used for combustion venting system. Inspected interior mechanical chase and confirmed non-compliant cellcore pipe installation running vertically through shaft. Documented existing conditions with photographs showing exterior termination point with beige oval vent cover mounted on vinyl siding and interior view of gray metal ducts within the vertical chase space. Corrected venting system by replacing cellcore piping with proper CPVC or approved venting material per manufacturer specifications and local code requirements to ensure safe exhaust of combustion gases and pass final inspection.

Responded to warranty callback for 3" PVC condensate drain leak at fitting connection on 2024 Lennox furnace installation. Replaced defective fitting and damaged pipe section, confirmed proper drainage and sealed all connections. Issue traced to original installation; repair completed under warranty at no charge to customer.

# Service Summary Completed scheduled heating and cooling preventive maintenance service as confirmed. Performed comprehensive system inspection and verified proper operation of heating equipment. Documented existing air filter conditions showing moderate dust accumulation and soiling on pleated media filters. # Work Performed Conducted routine preventive maintenance on HVAC system including visual inspection of furnace components and operational verification. Examined air filtration system and photographed current filter condition, noting dust and particulate buildup on pleated filter media consistent with normal usage patterns. Filters displayed gray discoloration and accumulated debris, particularly on intake side, indicating active filtration of airborne contaminants. Verified system functionality and confirmed heating equipment operating within normal parameters. All safety checks completed and system left in proper working order.

Performed scheduled MVP tune-up on heating system. Conducted pressure and temperature measurements using Fieldpiece diagnostic tool, with readings of 0.32 and 394 recorded. Inspected internal components, wiring connections, and safety systems to ensure optimal system performance.

Performed scheduled furnace tune-up on Lennox unit. Verified proper equipment leveling using spirit level and inspected air filter, which showed normal particulate accumulation. System operating within specifications after service.

Conducted a comprehensive assessment of the existing exterior HVAC unit (currently weather-protected with a tarp cover) and interior ductwork system including humidifier. Provided detailed replacement estimate for a complete system upgrade, recommending appropriate equipment sizing based on home's square footage and insulation values, with options for improved energy efficiency and enhanced indoor air quality components.

Conducted comprehensive evaluation of existing HVAC system and provided replacement estimate for both furnace and air conditioning unit. Current system includes an aging indoor air handler/furnace installed in utility area with connected flexible ductwork and drainage lines, plus an outdoor condenser unit positioned on concrete pad between house exterior and fence with electrical connections to junction box.